iDance Blaster 10 Bedienungsanleitung Seite 4

Operation: MP3 player
•
Insert USB to the USB receptacle and Blaster 10 will play the mp3 files stored inside USB.
•
Insert TF card to the TF receptacle and Blaster 10 will play the mp3 files stored inside TF.
(Blaster 10 supports MP3,WMA,WAV format)
•
Play/Pause: Press to Play / Pause current song
•
Previous/Next Song Key: Press to nagivate Previous/Nex Song
•
Repeat: Press to turn on/off playback repeat mode
Operation: FM mode
•
Press mode key to switch to FM mode
•
Play/Pause key: Press and hold for automatic searching, Press to mute and unmute
•
Previous/Next Song Key: Press to navigate stored radio.
Opertion: Bluetooth
Press mode button to enter Bluetooth mode, the display shows "BLUE". Using the native controls on your
Bluetooth device to scan for available devices and select "Blaster 10" to connect. Speaker will annouce
"Connected" once paired successfully.
•
Music playing: Press Play/Pause and Previous/Next Song Key to control the music
•
Pairing mode: Press and hold "Play / Pause" Key for 5 sec to enter Pairing mode.
Operation: LED light show
•
Light will on when power on.
•
In any mode, it will light on when no music.
•
In any mode, with music, LED light will jump up and down with volume high and down.
•
In any mode, press the "Light ON/OFF" button to turn LED ON/OFF
Operation: Charging the Blaster 10
•
Charging is needed when the battery symbol is empty and blinking, the Blaster 10 will enter low power self-
protect state, the volume will drop to 70%, please use our adapter to charge. Red light is on when charging
and turn off when charging is completed.
•
Note: Please charge for more than 12H for first time
Technical Index
•
Output power:9W
•
Frequency:90Hz-20KHz
• Speaker size: 4"2Ω*1
• S/N: ≥60dB
•
Power voltage: USB 5V
• Product size: W202*H288*D125
Packing List
:
• Unit speaker*1pcs
• User manual*1pcs
• USB Cable *1 pcs
EN3