Velleman WC40D Bedienungsanleitung Seite 6

Forced receiving
 To force the clock to synchronize, press and hold the forced
reception button for ± 3 seconds. The current time is stored in
memory and all hands will start moving towards 12:00. The clock
attempts to synchronize with the master clock.
 When synchronization is successful, the hands will move towards
the correct time. If it fails however, the hands will move towards
the time that was memorized.
Reset
 To reset the time and memory, use a piece of metal (e.g. a blank
paperclip) to short circuit the two metal reset pins.
 All hands will move to the 12:00 position and the memory is
cleared. The clock will attempt to synchronize to the master clock.
8. Battery
 Insert a new 1.5 V AA battery in the battery compartment in
accordance with the polarity markings inside the battery
compartment.
Warning: Do not puncture batteries or throw them in
fire as they may explode. Do not attempt to recharge
non-rechargeable batteries (alkaline). Dispose of
batteries in accordance with local regulations. Keep
batteries away from children.
9. Cleaning and Maintenance
 Wipe the device regularly with a moist, lint-free cloth.
 Do not use alcohol or solvents.
10. Technical Specifications
dimensions
dial ................................................................. Ø 35 cm
clock ......................................................... Ø 40 x 4 cm
weight ...............................................................± 1088 g
V. 02 – 03/03/2016
WC40D
6 ©Velleman nv