SETTING THE TIME
1. Pull the crown out one notch.
2. Turn the crown to position the hour disc to the desired time.
3. Push the crown back into its initial position.
Warning!
-
Never set the watch time when it is chiming.
MINUTE REPEATER FUNCTION
Push the minute repeater bolt (3) gently in the direction of the arrow to the
end stop, and then release. The chime may last up to 20 seconds.
Warning!
-
Never set the time or operate the crown during the chime.
-
Never repeat this operation before the chime has completely finished.
-
Never operate the minute repeater bolt under water.
ENGLISH | 25