Herunterladen Diese Seite drucken

HANSGROHE 27409 series Montageanleitung Seite 3

Vorschau ausblenden Andere Handbücher für 27409 series:

Werbung

Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The arm of the shower head is intended only to hold the
shower head. Do not load it down with other objects!
Assembly
27409XXX / 27412XXX / 27413XXX / 27416000 /
27417000 (see page 18)
Assembly
27410XXX (see page 19)
Assembly
27411XXX / 27415XXX (see page 19)
Important! The fitting must be installed, flushed and
tested after the valid norms.
Important! Do not use silicone containing acetic acid!
Where the contractor mounts the product, he should ensure
that the entire area of the wall to which the mounting plate
is to be fitted, is flat (no projecting joints or tiles sticking out),
that the structure of the wall is suitable for the installation of
the product and has no weak points. The enclosed screws
and dowels are only suitable for concrete. For another wall
constructions the manufacturer's indications of the dowel
manufacturer have to be taken into account.
Spare parts (see page 20)
Technical Data (see page 17)
English
Indicazioni sulla sicurezza
Durante il montaggio, per pevitare ferite da schiacciamento
e da taglio bisogna indossare guanti protettivi.
Il braccio del soffione della doccia è progettato per
sostenere solo quest'ultimo, non va sovraccaricato con
altri oggetti!
Montaggio
27409XXX / 27412XXX / 27413XXX / 27416000 /
27417000 (vedi pagg. 18)
Montaggio
27410XXX (vedi pagg. 19)
Montaggio
27411XXX / 27415XXX (vedi pagg. 19)
Attenzione! La rubinetteria deve essere installata, pulita
e testata secondo le istruzioni riportate!
Attenzione! Non utilizzare silicone contenente acido
acetico!
Quando il personale tecnico specializzato esegue il
montaggio del prodotto è necessario assicurarsi che la
superficie di fissaggio sia piana in tutta l'area di fissaggio
(senza giunti sporgenti o spostamento delle piastrelle),
che la struttura della parete sia adatta per il montaggio
del prodotto e soprattutto che non ci siano dei punti
deboli. Le viti e i tasselli in dotazione sono adatti solo per
calcestruzzo. In caso di altre strutture della parete vanno
osservare le indicazioni del produttore dei tasselli.
Parti di ricambio (vedi pagg. 20)
Dati tecnici (vedi pagg. 17)
Italiano


Werbung

loading