Technical Specifications - Kathrein CAS 180 Bedienungsanleitung

f) Once the antenna has been correctly aligned
Tighten all the securing elements "B", "C" and "D". Table of tightening torques:
Thread Ø M10
(Nm) 35

Technical Specifications

Type
Part no.
Diameter
Reception range
Antenna gain at 10.70-11.70 GHz
Antenna gain at 11.70-12.50 GHz
Antenna gain at 12.50-12.75 GHz
Half power beam width (at the centre of the band)
System figure of merit (G/T)
Cross-polarisation decoupling (in main beam direction)
Resulting from wind tunnel trials:
Wind speed 130 km/h:
Wind load
Dynamic pressure
Maximum wind speed 200 km/h:
Wind load
Dynamic pressure
Wind area
Mast clamp range, ZAS 186
Setting range, elevation
Setting range, azimuth
Dimensions width
Max. dimensions, height
Max. dimensions, protrusion (from centre of mast with a feed system)
Packaging size (L x W x H)
Weight approx. net/gross
Electronic equipment is not household waste - in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND
THE COUNCIL of 27
At the end of its service life, take this device for disposal at a designated public collection point.
Internet: www.kathrein.de
KATHREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 • P.O. Box 100 444 • 83004 Rosenheim • GERMANy • phone +49 8031 184-0 • Fax +49 8031 184-385
M16
M2
60 60
January 2003 on used electrical and electronic equipment, it must be disposed of properly.
th
m
GHz
dBi
dBi
dBi
°
dB
kN
N/m
2
kN
N/m
2
m
2
mm
°
°
mm
mm
mm
mm
kg
935.1606/A/ZWT/0910/e - Technical data subject to change.
CAS 180
216235
1.8
10.70-12.75
44.50
45.15
45.50
0.9
See feed system
EAS 484/485
> 30
3.2
800
7.5
1930
2.83
75-114
5-50
360
1980
1511
1900
2230 x 2120 x 390
60.0/81.5
All figures are typical values!