Temperature Limitation; Maintenance - Axor Starck Montageanleitung

Assembly
Attention! The fitting must be installed, flushed and
tested after the valid norms.
Adjustment
Correction is necessary if the temperature measured
at the take off point differs from the temperature
set on the scale. To adjust temperature proceed as
follows:
Turn the setting knob until water at a temperature
of 38° C comes out of the outlet. Loosen screw of
setting knob. Remove setting knob and turn to the
38° C position. Attach setting knob again and
tighten the screw.

Temperature limitation

The temperature is limited by the safety check to 38°
C (100° F). If a higher temperature is required, it is
possible to override the safety stop by depressing
the safety button.
Safety Function
The desired maximum temperature for example max.
42° C can be pre-set thanks to the safety function
(please see page 5).
Technical Data
Operating pressure:
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure:
(1 MPa = 10 bars = 147 PSI)
Hot water temperature:
Recommended hot water temp.: 65° C
Rate of flow 0,3 MPa:

Maintenance

There is no special maintenance for thermostats. The
non return valves (4) must be checked regularly ac-
cording to DIN EN 1717 in accordance with national
or regional regulations (at least once a year). At this
time, please also check the filter (.1) situated on
the MTC-thermo-element (). After assembling the
MTC-thermo-element, it is necessary to check the water
temperature at the take off point as described under
the headline „adjustment". Before the adjustment,
please check, if the warm water supply is activated
and the maximum temperature of the warm water is
available at the take off point.
English
max. 1 MPa
1,6 MPa
max. 80° C
approx. 43 l/min
To guarantee the smooth running of the thermostat, it
is necessary from time to time to turn the thermostat
from total hot to total cold.
Spare parts (see page 4)
1 handle for thermostat Starck
2 handle for thermostat Carlton "lever" 17391XXX
3 handle for thermostat Carlton "cross" 17994XXX
4 handle for thermostat Azzur
4 handle for thermostat Steel
5 handle for thermostat Montreux
6 handle for thermostat Terrano "lever" 37391XXX
7 handle for thermostat Terrano "cross" 37994XXX
8 handle for thermostat
Uno / Citterio M
9 handle for thermostat Citterio "lever" 39994XXX
10 handle for thermostat Citterio "cross" 39391XXX
11 handle for thermostat Massaud
12 adapter for handle
13 face plate Massaud
14 face plate
15 face plate Montreux
16 face plate Starck X
17 face plate Citterio
18 face plate Citterio M
19 sleeve
20 fixing screw
21 sub plate
22 thermostat cartridge
23 noise reduction
24 non return valve
25 extension set 25 mm
26 extension set 22 mm
27 extension set 22 mm
Citterio / Starck X / Massaud
28 extension set 22 mm Citterio M
29 sleeve Massaud
30 adapter for handle Massaud
10391XXX
34391XXX
35391800
16594XXX
38391XXX
18097000
96435000
98678000
96452XXX
98648XXX
97449000
96749XXX
98917000
96439XXX
96454000
96447000
94282000
94073000
94074000
13595000
13596XXX
97407XXX
98860000
98734000
98701000
11