Retevis RT35 Bedienungsanleitung Seite 3

ITEM DESCRIPTION
Number Description
Name
Long press this button can open / close radio; short
Power/Menu
1
press to enter the radio function setting.
Button
Press and hold this button to transmit information
2 PTT key
quickly press twice to send calling sound.
Use this button to adjust volume or function setting
3 Up key
choosing.
Use this button to adjust volume or function setting
4
Down key
choosing.
Long press to enter the scanning channel, short
Scan/Lampe
5
press to enter the illumination.
Long press to enter the inter-lock, short press enter
Monitor/
6
monitor function.
Lock button
7 MIC Built-in microphone.
Speaker Built-in speaker.
8
Enhanced signal reception and emission.
Antenna
9
USB Interface It is a walkie-talkie charging interface.
10
Earpiece Jack It is a walkie-talkie headset jack.
11
Flashlight It is a walkie-talkie lights.
12
LED It is a walkie-talkie LED.
13
Notice:
This radio come with a dedicated charger, To avoid damage your radio and lithium ion
batteries, please do not use other chargers. Please do not transmit when charging.
The new battery should be charger around 12hours when use it first time..
3
The main features of walkie-talkie
1.A plurality of selectable channels.
2.Automatic squelch.
3.Auto save power.
4.It has an internal voice intercom
(speakerphone) function.
Battery low power tips
When the unit is low battery in the talk mode and standby mode, power indication
start Flashes. Remind you to recharge.
Using the walkie-talkies
1.Press and hold the Power / Menu button about 3 seconds, the unit will power on to
speak mode, The display shows the icon
2.Press the Power / Menu button to access the function settings.
Activated icon will begin blinking.
Press repeatedly this button, explore other menu functions until back to the intercom
mode. Every time you press the Power / Menu button, the function or icon will show
on the screen.
3.After activate a function icon, press the up or down key to select menu options.
4.Press PTT-button to save and back to standby.
Select channel
1.When the radio is Standby, press the Power / Menu button again until the current
channel starts flashing on the LCD screen, you can change the Channel.
2.Press the up or down key to select the channel number.
3.Press the Power / Menu button to save the settings and return to the receiving status.
4.Press the PTT-button to save and return to the receiving status.
CTCSS/DCS
Select CTCSS/DCS which allows you to receive calls from members of the same group
(same mute code) issued, avoiding the same frequency interference from other users.
Note: CTCSS / DCS cannot make your talking content keep secret, it can only make you
unable to receive calls from other CTCSS / DCS users.
1.When standby, press the Power / Menu button twice, until the mute code of current
channel starts flashing, thus you can reset status of CTCSS/DCS.
Press the up key or down key to select the privacy code. Long press the up key or down
key to select the privacy code quickly.
2. Press the PTT / CALL to save the settings. Or press the power / menu button to enter
next function option.
Channel scan
Scan fucntion lets you scan all channels occupancy.
1.When standby, press the Scan button to activate scan function, the machine satarts to
scan all channel activities), when there are voices in scanned channel, it will stay 4~5s
in this channel, then continue to scan next channel.)
5.Having a channel scan function.
6.24-hour time display.
7.Alarm reminders appear.
8.Backlit display.
9.Use BL-5B lithium batteries
under intercom mode.
4