Use Of The Finimaster Ii; Introduction; Choice Of Speed - CIBO Finimaster II Leitfaden

Manual FinimasterII

Use of the Finimaster II

Introduction

• Before use, check the machine for defects (loose disc, damaged cable, etc.).
• Make sure that the voltage on the type plate corresponds to the voltage in the mains.
A 16 A safety fuse is used with voltage of 230 V.
• Only use the tools supplied by us!
Note: For safety reasons, remove the plug from the power socket whenever
changing a tool!
Make sure that the start button is set to "0" when inserting the plug.

Choice of speed

The speed can be changed on the side where the cable enters the machine. Continuously vari-
able regulation ensures a speed of:
Step Speed
1 2200
2 2900*
3 3800
4 4700
5 5600**
6 6500
Never use sanding disks or other accessories that are not suitable for the
speeds indicated.
It is recommended to make use of step 2 or step 3 for sanding with Tex wheels.
UK
39