Refitting The Netting To The Backrest Frame After Laundering; Transportation/Storage; Disposal/Recycling - Mangar Surfer Bather Bedienungsanleitung

D
C
A
Transportation / Storage
Disconnect the Airflo compressor from the
accidental inflation.
Ensure that the
Surfer Bather
the before storage may result in a build-up of mould on the surface of the product
Surfer Bather
leading to a weakening of the fabric and consequential invalidation of the product warranty.
Store in a dry environment.
To maintain the Airflo battery when being stored for long periods, put the Airflo on charge
overnight every 3 months.
Disposal / Recycling
When the
Surfer Bather
household waste recycling centre (civic amenity site).
When the Airflo has reached the end of it's working life, remove the batteries for safe disposal
in accordance with your local council guidelines, and dispose of the Airflo at your local
household waste recycling centre (civic amenity site).
Simple solutions for everyday independence
E
B
F
10
is clean and thoroughly dry before storing. Failure to thoroughly dry
has reached the end of its working life, dispose of it at your local
Maintenance and Care
Re-fitting the Netting to the Backrest Frame
after laundering
• Insert the thigh support foam (A fig.10) in the
netting lower pocket.
• Insert the backrest frame into the pocket of the
netting (B) and fasten the four buckles (C).
• Tighten or slacken the buckle straps in order to
adjust the tension of the netting on the backrest
frame.
• Insert the headrest foam (D) in the pocket of
the headrest netting and if required, Velcro ®
the headrest to the backrest.
• The chest strap (E) can be attached to the
Velcro ® panel (F) as required.
before transporting so as to avoid
Surfer Bather
9