Troubleshooting; Specifications - Mangar Surfer Bather Bedienungsanleitung

• Surfer Bather fails to inflate or will not stay at
the chosen height.
• Compressor does not run when 'Up' is
selected on the hand control.
• Compressor keeps stopping when trying
to inflate the
Surfer Bather
• Battery State Indicator light flashing 'Red/
Green'.
• Battery State Indicator light flashing 'Red'.
Max 48cm
Min 8.5cm
Simple solutions for everyday independence

Troubleshooting

Problem
.
Max
62cm
Maintenance and Care
Remedy
• Ensure that the air hose from the Surfer Bather
is connected to the Airflo.
• Check that there are no kinks in the air hose
and that the air hose is not trapped.
• Check that the pressure relief valve is operating
properly.
• Ensure that the air hose from the
is connected to the Airflo.
Bather
• Check that there are no kinks in the air hose.
• The current overload cut-out has tripped.
Leave for 3 seconds to self reset.
• The compressor's internal temperature cut-
out has tripped. Leave the Airflo for 60-90
minutes to cool.

Specifications

Maximum user weight:
Recommended Max. user height:
Platform height (min/max):
Backrest angle:
Platform assembly weight:
Scissor Lift assembly weight:
Total weight in carrying bag:
Maximum Air Pressure:
Surfer
50 kg
135 cm
8.5 cm – 48 cm
From flat to 70º
4.2 kg
5.5 kg
9.7 kg
0.35 bar
11