Herunterladen Inhalt Inhalt Diese Seite drucken

Taurus MF3000 Bedienungsanleitung Seite 16

Ventilator mit luftbefeuchter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 22
- Tight the grill nut (4.2) that attaches the grill,
Make sure of a correct setting.
- Fit the propeller (4.4) On the motor shaft (4.1).
- Tight the nut (4.5) that attaches the propeller,
Make sure of a correct setting. Gear it counter-
clockwise.
- Fit the front grill (4.7) front the rear grill (4.2),
matching the security screw position. Fix the
front grill turning around its fixing belt and tight
the security screw by using a screwdriver.
- Check the correct rotation of the propeller.
WATER TANK ASSEMBLY (FIG 5)
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has been
removed.
USE:
- Unroll the cable completely before plugging it in.
- Attach the appliance to its base making sure
that it is correctly fitted into place.
- Connect the appliance to the mains.
- Guide the appliance to direct the flow of air in
the desired direction.
- Turn the appliance on, by using one of the spe-
ed selection buttons.
- Select the desired speed.
TIMER FUNCTION (FIG. 1)
1 – OFF timer position
2 – OFF fan function (0min)
3 – Timer selector
- The appliance's operating time can be contro-
lled.
- To program the operating time simply select it
using the knob.
- After the selected time the appliance will switch
off automatically.
OSCILLATION FUNCTION:
- To activate this function turn the knob (J).
- To deactivate this function, follow the procedure
for switching it on in reverse.
MIST FAN FUNCTION (FIG. 2)
1 – Off Nebulizer position
2 – Mist selector
- Fill the water tank with Water (G)
- Select the mist powerdesired
- Once the appliance is ready, it will dispel mist
through the nebulizer.
HEIGHT ADJUSTMENT
- The appliance height can be adjusted; it's just
necessary to unlock the adjustance knob, place
the appliance at the desired height and lock
again the knob.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance, selecting position 0 on the
selector control.
- Unplug the appliance from the mains.
- Clean the appliance.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
ANOMALIES AND REPAIR
- Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
- The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to
the environment.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis