Fakir LUMINOSO Benutzerhandbuch Seite 36

EN
NOTE!:
Water temperature shall not exceed 40°C.
Maintenance of the Dust Collection Unit
Removal and Installation of the Dust Collection Unit
Push the unit towards the housing (B) first. (Figure 1)
Pull the unit towards yourself. (Figure 2)
Apply the reverse procedure to install the components again after cleaning.
Cleaning of the Dust Collection Unit
Wash the unit with lukewarm water and detergent. Clean with a tooth brush or a soft brush.
Reinstall it once you are sure that it is dried.
NOTE!:
Water temperature shall not exceed 40°C.
36