DJI N3 Kurzanleitung Seite 7

2. Preparation
Check the items listed in the In the Box list and make sure all items are in good condition. If there are
any missing or damaged items, contact DJI Support. DJI Assistant 2 is used to configure the N3 flight
control system.
The N3 is a powerful system. To make use of all its capabilities, read the user manual thoroughly
before configuration.
Read the User Manual
This DJI User Manual is for configuring the N3 flight control system.
http://www.dji.com/n3/info#downloads
Download the DJI Assistant 2
DJI Assistant 2 is used to configure the N3 flight control system.
http://www.dji.com/n3/info#downloads
Supports Windows 7 (or later) or Mac OS X 10.9 (or later).
●
Download the DJI GO App
Search "DJI GO" on the App Store or Google
Play and install the app on your mobile device.
DJI GO App
This is required if using the DJI Lightbridge 2 video downlink.
●
The DJI GO app supports iOS 8.0 (or later) and Android 4.1.2 (or later).
●
Prepare your Equipment
Ensure your airframe, remote controller system, ESCs and battery are suitable for use with the N3.
Below is a list of compatible equipment.
Airframe:
Remote Controller System: DJI Lightbridge 2, DJI DR16, S-Bus
ESCs:
Battery:
Optional Equipment:
Types I4, X4, I6, V6, Y6,IY6, X8, I8, V8
ESCs with up to 400 Hz control frequency
3S to 12S LiPo battery
DJI Intelligent Landing Gear, DJI Zenmuse Z15, DATALINK PRO,
iOSD mini, iOSD MARK II, DJI Smart ESC, etc.
N3 Quick Start Guide
Watch the Video Tutorials
http://www.dji.com/n3/info#video
Scan the QR code to watch the tutorial videos.
©
2017 DJI All Rights Reserved.
PDF
5