Led Module - DJI N3 Kurzanleitung

N3 Quick Start Guide
Parts
1
2
3
4
6
7
8
9
10
Flight Controller
1. PMU Port
Derives power from the PMU module.
2. LED Port
Communicates with the LED module.
3. M1-M8 Pins
Connects to the corresponding ESC PWM port for each
motor.
1
2
GNSS-Compass Module
1. Orientation Arrow
The GNSS-Compass module should be mounted with the
arrow pointing toward the aircraft nose.
2. GNSS-Compass Status Indicator
Indicates the status of the GNSS-Compass Module.
3. Extended CAN1 Port
Dedicated DJI CAN-Bus port. Communicates with a DJI
device.
1
2
3
PMU Module
1. iBAT
Reserved port.
©
2017 DJI All Rights Reserved.
4
5
13
12
11
3
5
4
4. iESC Port
Communicates with the DJI Smart ESC using the Smart
ESC Communication Cable.
5. RF Port
Communicates with the DJI Lightbridge 2 Air System.
6. Status Indicator
Indicates the status of the flight controller.
7. CAN2 Port
CAN Bus port (Reserved port).
8. S-Bus Port
Communicates with a DJI DR16 or S-Bus receiver.
9. F1-F4 Pins
Multifunction PWM output ports.
10. F5-F8 Pins
Multifunction PWM I / O ports.
11. API Port
Communicates with an SDK device.
12. EXP Port
Extended port (Communicates with the A3 upgrade kit).
13. Orientation Arrow
The flight controller orientation arrow.
LED

LED Module

1. Flight Status Indicator
Indicates the status of the flight control system.
2. Micro USB Port
Used to configure and upgrade the N3 via DJI Assistant 2.
2. Power Status Indicator
Indicates the power status of the flight control system.
3. 3S-12S
Derives power from LiPo battery.
4. Power Port (9V 2A)
Connected to the Flight Controller for power supply.
5. CAN1 Port
Connected to the GNSS-Compass module.
1
2