Taurus POWERED AIR Handbuch Seite 8

reduced mental or lack of experience and
knowledge.
- Do not work on areas where there are metal
objects, such as nails and/or screws.
- Never vacuum hot or sharp objects (cigarette
butts, ashes, nails, etc.).
- Only use the appliance for carrying out dry tasks.
- Never leave the appliance connected and un-
attended if is not in use. This saves energy and
prolongs the life of the appliance.
- Do not use the appliance on any part of the
body of a person or animal.
SERVICE:
- Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
- Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer's liability null and void.
DESCRIPTION
A ON/OFF switch
B Power cord
C Main body
D HEPA Filter
E Filter Protector
F Dust tank
G Power cord hook
H Extention tube
I Disconnecting tube button
J Brush
K Lance
L Multiuse brush
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
VACUUMING FUNCTION:
- Fit the hose unit to the vacuum cleaners air
intake.
- To disconnect the hose unit from the vacuum
cleaner, press the button to disconnect the tube
from the main body where is situated in the rear
side. (Fig.1).
INSERTION OF ACCESSORIES INTO THE
APPLIANCE'S GRIP:
- The appliance's grip is designed in such a way
that it allows the insertion of the following acces-
sories (use the combination that best meets
your requirements):
- Extention tube: designed to provide access to
surfaces which are out of reach and make floor
cleaning comfortable.
- Head: specially designed for cleaning floors
(both rugs and carpets and hard floors),
- Lance: specially designed for getting into cracks
and difficult corners.
- Multiuse brush
USE:
- Take the length of cable required out of the
housing.
- Connect the appliance to the mains.
- Turn the appliance on, by using the on/off button.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off using the on/off button.
- Unplug the appliance from the mains.
- The cable housing means you can remove and
have available the required length of cable for
working with the appliance, preventing accident
risk situations.
CLEANING
- Disconnect the appliance from the mains and allow
it to cool before undertaking any cleaning task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
EMPTYING THE DUST BOX
- Empty the dust box when it is full (observation
facilitated by transparent windows), or when
vacuuming power is notably reduced.
- Disconnect the dust box from the appliance
(Fig.2).
- Open the lid of the dust box and empty the
contents into the appropriate waste disposal
receptacle.
- Check the condition of the dust box filter.
- Close the lid of the dust box.