Count Of Operations - sammic HM-1001 Bedienungsanleitung

X2 function can only program one stage cooking. After setting is finished, press STOP/RESET to return to
waiting mode.
The oven will start after you touching X2 and then any of the number keys.
For example, to use the X2 function, and save a program of full power
and 3 minutes cooking to number pad 8.
1.
2.
3.
4.
5.
6.
Note: If you want the oven to start after you touching the START pad instead of immediately after you touching
any of the number keys. Press and hold down STOP/RESET for 5 sec; now you have to press START pad after
selecting a cooking program by touching X2 and any of the number keys.
C
OUNT OF OPERATIONS
You can read the count of how many times the oven has been used. To do this,
1. Open the door.
2. Press and hold down STOP/RESET and then touch POWER LEVEL pad. The number on display shows how
many times the oven has been used.
This function is for the user to analyze the usage of the oven and the traffic flow at a particular location where the
oven is being used commercially.
C
HILD LOCK
In waiting mode, press and hold PROG for 5 seconds. The oven is locked.
To release child lock,
In waiting mode, press and hold PROG for 5 seconds, the oven goes to normal.
Touch PROG once.
Touch X2 pad once.
Press number pad 8.
Press POWER LEVEL once.
Touch number pads 3,0,0
Press PROG to save.
, ,
7