LG V-net PQNUD1S00 Bedienungs- Und Montageanleitung Seite 25

Installer Setting - Checking Address of Central Control
1 With the PLASMA button pressed, press the RESET button.
2 Press the ON/OFF button toward the indoor unit 1 time, and the indoor unit will display the set
address in the display window.
- The address display time and method can differ by the indoor unit type.
Reset the remote controller to use the general operation mode.
1 With the MODE button pressed, press the RESET button.
2 By using the TEMPERATURE SETTING button, set the indoor unit address.
- Setting range : 00 ~ FF
Group No.
Indoor Unit No.
3 After setting the address, press the ON/OFF button toward the
indoor unit 1 time.
4
The indoor unit will display the set address to complete the address setting.
- The address display time and method can differ by the indoor uint type.
5
Reset the remote controller to use the general operation mode.
How to set each Indoor Unit
Userʼs Manual 25