LG V-net PQNUD1S00 Bedienungs- Und Montageanleitung Seite 15

- After setting the product, press ▶ to select the next option.
• Watt meter selection
- When the third 3 digits flash, use the ▲ or ▼ key to select the meter constant of the
watt meter.
[000] -> 1 wh/ Pluse
[010] -> 4 wh/ Pluse
[100] -> 8 wh/ Pluse
[110] - > PT/CT : In case of CT using.
Ex) Product selection: Master, watt meter: 2W/ pulse
1 1 0 0 0 0 0 1 0 M a s t e r 2
M I C R O N I C
- After setting the product, press ▶ to select the next option.
Ex) In case of CT (Current Transformer) using.
- CT ratio 20 : 1
- Watt-hour meter : 2500 Pulse/kWh
1 1 0 0 0 1 1 0 0 M a s t e r PT/CT
M I C R O N I C
When the first digit flashes, use the ▶ key to shift cursor right.
And you can use the ▲ or ▼ key to set value of CT & watt-hour meter.
I n p u t
C T : 0 0 0 2 0
LGAP
/ [001] ->
/ [011] ->
/ [101] ->
[001] is set to 2W/pulse and shows the
meter constant of the watt-hour meter.
N O - S T B P
N O - S T B P
I n [P u l s e / k W h ]
/ P r : 0 2 5 0 0
Press the ▶ key to set up
the option for watt meter
selection.
2 wh/ Pluse
6 wh/ Pluse
10 wh/ Pluse
W / p
After setting PT/CT(110),
press 'SHIFT' key.
After setting value of
CT & watt-hour meter,
press 'SHIFT' key.
Userʼs Manual 15
Installation