How to set Interface unit
PI-485
ON
KSDO4H
L1 2 3 4
Multi V & Multi(LGAP applied) products Configuration Methods
➔ 1 ON, All others OFF: Multi V products(Except CRUN products) or Multi
ON
➔ 1 and 4 ON, All others OFF: Multi V products(Except CRUN products) or
ON
➔ 2 ON, All others OFF: Multi(Non-Inverter) Product
ON
➔ 2 and 4 ON, All others OFF: Multi Non-Inverter Product
ON
➔ 1,2,3,4 ON : Multi V CRUN Product
ON
• Please refer the corresponding Central Controller installation manual if you want to know
whether your Central Controller is compatible with LGAP or not.
CAUTION
The wrong setting of air-conditioner switch could cause malfunctioning.
Switch setting must be done carefully.
Push the Reset button after changing the Dip switch.
NOTE : Multi(Non-Inverter) Product applied Common PCB
PCB P/NO. : 6871A20917*
P/NO. : 6871A20918*
P/NO. : 6871A20910*
(Non-Inverter) Product applied Common PCB(Refer to NOTE) or
Multi(Inverter) Product + Central Controller(All types) - Without LGAP
Multi(Non-Inverter) Product applied Common PCB or Multi(Inverter) Product +
Central Controller(All types) - Using LGAP
+ Centroller(All types) - Without LGAP
+ Central Controller(All Types) - Using LGAP
+ Central Controller(All types) - Using LGAP
Select Network Type
Select Air
Conditioer Type
Select Advanced Control Type
Installation
Userʼs Manual 19