Maintenance And Care; Warranty And Servicing - Tru-Test MP Series Load Bars Kurzanleitung

Maintenance and care

7
Ensure that the underside of the platform or crate and gap between the load bar housing and foot is kept free of dirt
•
and stones.
Do not leave the indicator, load bars or plugs immersed in water.
•
Cables should be placed so that they will not be damaged. We recommend routing the cables through plastic pipe or
•
other conduit to help prevent damage.
When not in use, always replace the dust caps on the load bar plugs. When the load bars are connected to the
•
indicator, screw the two dust caps together.
Remove dust and moisture from the plugs and caps using methylated spirits, ethyl alcohol, or a suitable electrical
•
contact cleaner. Stronger spirits must not be used, as they may react with the plastic.
Disposal
8
This product must be disposed of separately from household waste. Instead, it is your responsibility to dispose of
your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will
help conserve natural resources and ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste equipment for recycling, please
contact your local city recycling office or the dealer from whom you purchased the product.

Warranty and servicing

9
For service and warranty information, see www.tru-test.com/product-warranty
4