Getting Around - Tru-Test MP Series Load Bars Kurzanleitung

Getting around

3
Installing MP load bars
4
1. Choose the location for the load bars and platform. Select a firm and level site free of any obstacles, with space
around the platform or crate to avoid binding. A concrete pad is ideal.
2. Bolt the platform or crate to the load bars using the four M10 x 40 bolts supplied.
3. We recommend that you anchor the platform or crate in place to stop movement. However, in non-permanent
applications, you can use without anchoring, but during use, pay careful attention to any movement.
Caution!
- Dropping the load bars can cause damage.
- Do not weld the platform or crate while the load bars are attached.
2
Bolts
10 mm thread
4 places
Load bar