Product And Package Contents; Preliminary Warning Notices; Initial Operations, Safety Instructions - Laserworld CS-1000RGB MKII Bedienungsanleitung

1. Product and package contents

Please check if all listed parts are included and undamaged. Included in delivery:
1 x laser projector
1 x power cable
1 x manual

2. Preliminary warning notices

Please use this device only according to these operating instructions.
1.
Do not use the device if there are any visible damages on housing, connector
2.
panels, power supplies or power cords.
Never look directly into the light source of a laser projector. Danger of dama-
3.
ge to the eyes or even blindness in extreme circumstances!
4. Do not operate the device at high humidity, in the rain or in dusty
environments.
Protect device against dripping or splashing water. Do not place any liquid filled
5.
containers near to this device.
Any warranty claims are void if the warranty label is removed or tampered

Initial operations, safety instructions

3.
Make sure to use correct voltage;
1.
see information on device & in this
manual.
Make sure that the device is not
2.
connected to mains during ins-
tallation.
3. Installation has to be done by
technical experienced and qua-
lified persons according to safe-
ty regulations of the respective
country.
EN page 3 / 12
1 x Interlock connector (already attached)
1 x key (for key switch)
with in any way.
4. Always ensure that maximum
permissible exposure (MPE) is
not exceeded in areas accessib-
le to the public or members of
staff.
5. In
tional
nical
could be necessary.
Connect an easily accessible inter-
6.
lock connector or circuit breaker
to the projector.
Manual: Club Series MKII
some countries
inspection
control
an addi-
by tech-
institutes