Maintenance; Replacement Parts - Hamilton Beach Summit Series Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

A-840083400B-ENv01 11/30/01 3:57 PM Page 15

Maintenance

Inspect the blender and its various parts and replace as follows:

Daily

Unplug the blender and remove the jar from the base, and then inspect the jar

and cutter assembly for wear, nicks, or broken blades. Replace if necessary.

See "Replacement Parts". If the cutter assembly blades are loose,

discontinue use immediately. Do not attempt to repair or tighten the cutter assembly.

Unplug the blender, and then inspect the power cord insulation and power plug

Weekly

for cracks. Inspect sealing gasket for cracking and leaking of fluids under unit.

Refer to "Requesting Assistance or Service" for repair or replacement.

Yearly

Replace the jar and cutter assembly at least once a year or sooner if the cutter assembly

appears worn or damaged. See "Replacement Parts".

NOTE: Do not operate this blender if it malfunctions or is dropped or damaged in any manner.

Return blender to the nearest authorized service facility for examination, repair, or electrical or

mechanical adjustment.

Refer to "Requesting Assistance or Service" to order parts below.

Description . . .

32 oz.0.95 L Polycarbonate jar and cutter assembly

(includes cover/filler cap)

Quiet Shield™ sound enclosure

Caring for the Blender

Part Number . . .

6126-91515

QS916

Inhaltsverzeichnis