Symbols And Their Meanings; Detailed Description - Bosch PFS 5000 E Originalbetriebsanleitung

Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.

Symbols and their meanings

"Wood/glaze" applica-
tion:
The fine-spray system is
Spraying glazes and
suitable for glazes and
primers
lacquers and for wall
paints.
Choose the grey nozzle
cap (11) for the "wood/
glaze" application
Step 1:
Choose the correct
nozzle cap
Select setting 1, 2 or 3
on the thumbwheel (4)
for the "wood/glaze" ap-
Step 2:
plication
Setting the spray mater-
ial quantity
Set the "wood/glaze"
application at the air
flow control (25)
Step 3:
Setting the air flow
Bosch Power Tools
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Symbols
The sticker regarding operation of the fine-spray system is located on the
base station. The correct interpretation of the symbols helps you operate the
fine-spray system better and more safely.
"Wood/lacquer" ap-
"Wall" application:
plication:
Spraying emulsion and
Spraying solvent-based latex paints
and water-dilutable lac-
quers, clear lacquers
and oils
Choose the black nozzle Choose the white nozzle
cap (12) for the "wood/
cap (10) for the "wall"
lacquer" application application
Select setting 4 or 5 on
Select setting 1, 2 or 3
on the thumbwheel (4) the thumbwheel (4) for
the "wall" application
for the "wood/lacquer"
application
Set the "wood/lacquer"
Set the "wall" applica-
application at the air
tion at the air flow con-
flow control (25)
trol (25)
English | 19

Detailed description

(see "Intended Use",
page 20)
(see "Changing the
nozzle cap (see fig-
ures B1–B2)",
page 21)
(see "Setting the spray
material quantity (see
figure J)", page 22)
(see "Setting the air
flow (see figure D)",
page 23)
1 609 92A 58E | (30.09.2019)