Whispbar K420W Montageanleitung Seite 7

EN
Fitting Kit
K420W
Fitment
Remove fixed-point covers by turning the
plastic screw with flat-head screw driver
(1).
Remove sealant (2) to reveal plastic screw
(3).
Caution: Do not damage the screw head.
Remove the plastic screw (3) with a
Philips-head screw driver.
Select grubscrews and screw into the
vehicle's fixed points.
Do not over tighten.
Repeat for all four positions.
Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
crossbar adjustment.
Place crossbar foot over grubscrews.
7