Simons Voss Technologies WaveNet Installationsanleitung Seite 12

3. Make sure that the power supply that you use (not included in the WaveNet RouterNode deli-
very!) complies with the manufacturer's information (see WaveNet technical documentation).
4. Connect the WaveNet RouterNode to the power supply (make sure that the polarity is correct!).
Check whether the Router Node LED is steady green, indicating that the RouterNode is ready
for operation.
5. Now use the PC and the SimonsVoss software to check the RouterNode function:
· SimonsVoss Software (LDB) displays the appropriate network ID (group ID / member ID) if
the WaveNet RouterNode is ready to function.
· If the RouterNode anwers in the LDB, you can check the ready to send and receive status
by pressing the "Init button" on the RouterNode.
ATTENTION.
· Avoid direct exposure to the sun!
· Keep away from sources of magnetic interference!
· The device does not contain any overvoltage protection!
· Make sure that the polarity is correct when attaching the device to the power supply!
· We reserve the right to make technical changes.
12