Product Description And Specifications; Product Features; Technical Data - Bosch GLI 18V-10000 C Professional Originalbetriebsanleitung

ated dangers. Otherwise, there is a danger of operating
errors and injuries.
Do not allow children to use the cordless worklight. It
u
is intended for professional use. Children can uninten-
tionally blind themselves or other persons.
Stop using the worklight if the battery compartment cover
u
no longer closes; remove the button cell and have the
worklight repaired.
Product Description and
Specifications
Intended Use
The cordless worklight is intended for mobile illumination of
indoor areas in a limited space and for a limited time and is
not suitable for general room lighting.
Bluetooth® enables the cordless worklight to be operated us-
ing the "Bosch Toolbox" app.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Light (LED)
(2) Supporting leg
(3) Safety bracket
(4) Carrying handle
(5) Brightness indicator
(6) Battery charge indicator
(7) On/off switch
A)
(8) Battery
(9) Tripod mount
A)
(10) Battery release button
(11) Battery compartment cover
(12) Button cell
(13) Heat sink
(14) Battery holder
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Cordless worklight
Article number
Rated voltage
A)
Lighting duration , ap- min/Ah
prox.
Total luminous flux
Level 1
Level 2
Level 3
Bosch Power Tools
The colour rendition of illuminated objects can be distorted.
Assembly
Putting the button cell into operation
(see figure A)
GLI 18V-10000 C
The cordless worklight is fitted with a button cell so that it
3 601 D46 9..
can be detected by the mobile device even if no battery (8)
V= 18
is inserted.
12.5
Remove the separating film between the button cell (12)
and the button cell contact when using the tool for the first
time.
To open the battery compartment cover (11), turn it anti-
lm 1000
clockwise with a screwdriver and then lift off the battery
lm 5000
compartment cover. Remove the film from the button cell
lm 10,000
contact and close the battery compartment cover back up.
Cordless worklight
Permitted ambient tem-
perature during char-
ging
Recommended ambient
temperature during op-
B)
eration and during
storage
Recommended batter-
ies
Recommended chargers
Button cell
type
Protection class
Data transmission
C)
Bluetooth®
D)
Signal range
Operating frequency MHz
range
Max. transmission mW
power
A) At maximum brightness incl. remaining operating time in
dimmed mode
B) Limited performance at temperatures <0 °C
C) The mobile devices must be compatible with the Bluetooth® ver-
sion specified and support the Generic Access Profile (GAP).
D) The signal range may vary greatly depending on external condi-
tions, including the receiving device used. The Bluetooth® range
may be significantly weaker inside closed rooms and through
metallic barriers (e.g. walls, shelving units, cases, etc.).
System requirements
Mobile device (tablet, smart- Android, iOS
phone)
A) Minimum system requirements can be found in the app store for
your mobile device (e.g. Google Play or iTunes).
English | 11
GLI 18V-10000 C
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
V= 3
CR 2032
/ III
Bluetooth® 4.2
(Low Energy)
m 15
2402–2480
< 1
A)
1 609 92A 4U9 | (03.09.2019)