Gewiss SYSTEM Serie Handbuch Seite 25

The time is incremented/decremented in steps of 5 minutes each time the
are pressed.
It is therefore possible to define up to 12 relay switches every hour.
The programming is confirmed by prolonged pressure on the MODE key.
A move is made automatically to programming the next day.
The programming phase is exited by pressing the SET key or, in automatic mode, 30 sec-
onds after the last key entry.
Save and propose again
If, however, it is required to copy the program directly to the next day, the programming just
done is confirmed by pressing the
In this mode the program just run is saved and also proposed again the next day; to copy
and save the same program over several days, repeat the operation of simultaneously
pressing the keys within 30 seconds.
On completion of weekly programming the SET/PROG key is pressed to return to normal
operating.
Programming
e) The time blinks, select the start hour from which it is
required to select a new switch as described in point c).
keys simultaneously 30 seconds.
25
E
N
G
L
keys I
S
H