Fakir FILTER PRO Bedienungsanleitung Seite 65

Pollen filter and electro-static filter can be washed, but make sure they are completely dry
before installing back. For washing electro-static filter just place it under tab water and never
rub with another object or touch any of its wires.
NOTE!
If wires and contacts are damaged ESF will not operate.
When installing pollen filter on ESF, pollen filter should be located as shown in the picture
below aligned with its short tabs to red panel of electro-static filter housing.
ATTENTION!
If pollen filter is not installed properly on ESF, filters will not seat into their housing on the
appliance.
Magnets on electro-static filter should be facing upwards and filter contacts should align the
contacts at the filter housing of the appliance.
When the filters are located into their housing, pollen filter should be at the rear and black
panel of the electro-static should be facing backwards.
65
EN