Troubleshooting - Vitek VT-3479 R/BK Betriebsanweisung

TROUBLESHOOTING

If a fault occurs, first check the points listed be-
low before taking the set for repair.
Do not open the set as there is a risk of electric
shock.
If you are unable to remedy a problem by follow-
ing these hints, consult your dealer or service
center.
WARNING: Under no circumstances should you
try to repair the set yourself, as this will in-
validate the warranty.
-No sound /power
- Volume not adjusted
• Adjust the VOLUME
- power cord not securely connected
• Connect the AC power cord properly
- Batteries dead/ incorrectly inserted
• Insert (fresh) batteries correctly
Display does not function properly / No re-
action to operation of any of the controls
- Electrostatic discharge
• Switch off and unplug the set. Reconnect
after a few seconds
Poor cassette sound quality
- Dust and dirt on the heads, etc.
• Clean deck parts etc., see Maintenance
- Use of incompatible cassette types (METAL
or CHROME)
• Only use NORMAL (IEC I) for recording
Recording does not work
- Cassette tab(s) may be broken
• Apply a piece of adhesive tape over the
missing tab space
no disc indication
- No CD/MP3 inserted
• Insert a CD,MP3, CD-R.
- CD badly scratched or dirty
• Replace/ clean CD, see Maintenance
- Laser lens steamed up
• Wait until lens has cleared
- CD-R is blank or the disc is not finalized
• Use a finalized CD-R
CD/MP3 playback does not work
CD/MP3 badly scratched/dirty
• Replace/clean CD/MP3 (see maintenance)
3479.indd 9 3479.indd 9
- Laser lens steamed up
• Wait until lens has adjusted to room
temperature
The CD/MP3 skips tracks
- CD/MP3 damaged or dirty
• Replace or clean CD/MP3
- Program is active
• Quit Program mode(s)
Environmental information
We have done our best to reduce the packaging
and make it easy to separate into 3 materials:
cardboard, paper pulp and expandable polyeth-
ylene.
Your set consists of materials which can be
recycled if disassembled by a specialized
company. Please observe the local regulations
regarding the disposal of packaging, dead bat-
teries and old equipment..
The manufacturer reserves the right to make
changes to the characteristics of the device
without prior notice.
The service life of the device is no less
than five years.
Guarantee
Details regarding guarantee conditions can
be obtained from the dealer from whom the
appliance was purchased. The bill of sale or
receipt must be produced when making any
claim under the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC and
to the Low Voltage Regulation
(23/73 EEC)
9
ENGLISH
11.04.2006 16:36:14 11.04.2006 16:36:14