Diamond D604-EKS Bedienungsanleitung Seite 11

GB
4
5
6
1
2
.
4. Press the button shown here to select the
Short cycle
The indicator light corresponding to the selected
cycle will go on.
Note: select "∝" for longer washing cycles.
5. The cycle will terminate when the
6.
Note: To stop the "∝" washing cycle, press the
button (for new washing programs, repeat step
no. 3).
desired washing cycle:
II
I
v
Medium cycle
corresponding indicator light will stop blinking.
Each program performs a washing, hold,
draining, and rinsing cycle.
Shut the door and press the button on the left;
the appliance will start automatically. For the
next cycles press the button again
4.2.1 Automatic tank
drainage (optional)
1. Press the button on the left and
select the
corresponding light will go on).
2. Press the button on the left; the
appliance will automatically run a
draining program.
The draining program consists of a tank
self-cleaning cycle. It will therefore start
with the tank empty, which is filled up,
and then followed by a washing, draining,
and rinsing cycle, and is finally completed
by a second
appliance will
Pag. 11
III
Long cycle
draining cycle (the
draining cycle. The
then shut down