CAME BPT TH/450 GSM Bedienungsanleitung Seite 59

F
TH450
If you have chosen the P4 program, pressing button P gives access to the programming of
the individual parameters that make up the manual P4 program
G
TH450
H
TH450
I
TH450
Use the buttons to choose
the desired program from: P1, P2,
P3, F (see graphic and table
L); press button P to confirm
your choice and end programming.
The first parameter concerns
the duration of the power-on
cycles G.
Use the buttons to choose
the duration of the cycle - 5, 10,
15, 20, 25, 30, 35 or 40 minutes
H.
Press button P Ito confirm the set
cycle time and switch to adjusting
the minimum ON time.
Use the buttons to choose
the minimum ON time between 1
and 5 minutes.