Axis 210/211 Network Camera Quick Installation Guide; Package Contents - Axis 210 Kurzmontageanleitung

AXIS 210/211 Quick Installation Guide
AXIS 210/211 Network Camera
Status
AXIS 210
indicator
Underside
Follow these steps to install the AXIS 210/211 on your local network (LAN):
1. Familiarize yourself with the AXIS 210/211 Network Camera (this page).
2. Connect the camera - see Cable Connections, on page 4.
3. Assign an IP address - see Installation Methods, on page 4.
For more information, please see the User's Manual, which is available on the CD
included in this package. Updated versions can be obtained from www.axis.com

Package Contents

Item
Network Camera
Power adapter
Camera stand
Terminal block connector
CD
Printed Materials
Quick Installation Guide
Serial number
Control button
Power indicator
Network indicator
Notes
AXIS 210 or AXIS 211.
The adapter is country-specific. Please check that the adapter is correct for your location.
Supplied with 3 mounting screws. The extension section is ready fitted.
4-pin. Used for connecting external devices.
Documentation and software.
•

AXIS 210/211 Network Camera Quick Installation Guide

• Axis Warranty Document
Zoom puller
(Tele/wide)
Status
indicator
Focus puller
DC-Iris
DC-Iris control cable
(AXIS 211 only)
Power connector
Page 3
AXIS 211
Control
cable
Rear panel
I/O terminal
connector
Network connector
(and PoE for AXIS 211)