Herunterladen Inhalt Inhalt Diese Seite drucken

Bayan Audio soundbook Bedienungsanleitung Seite 5

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
Bluetooth Status
The Soundbook display will also show the current status of the Bluetooth connection. The Bluetooth status
light (shown in the right-hand diagram) will flash when there is no Bluetooth audio source connected to
the Bluetooth speaker, and will illuminate solid when a Bluetooth audio source is connected.
Note: If you are trying to connect your audio source to the Soundbook via Bluetooth and another device
is already connected (e.g. the Bluetooth status light is illuminated solid), the Soundbook will reject your connection request – you must
first disconnect the Bluetooth source that is already connected to the Soundbook.
Connecting a source to the AUX input
Use the supplied 3.5mm stereo jack cable to connect the headphone output from your source device to the BLUE AUX input on the
back of the Soundbook.
Select the AUX input by short-pressing the Power/input button until the display reads 'In' (Auxiliary Input)
Controlling Volume for Bluetooth and AUX music playback
There are 2 volume controls available to adjust how loud your music is playing back – on the audio source itself, and on the
Soundbook. You will not be able to get maximum volume unless the volume is turned up to maximum both on the audio source
and the Soundbook.
Listening to FM Radio
The Soundbook has an integrated FM antenna located inside the cover/stand. In order to obtain a good FM radio signal it may
be necessary to move the Soundbook to an alternate location.
To listen to FM radio, short-press the Power/input button until the display shows the current FM frequency (FM Radio).
To tune the FM radio, either short press the TUNE UP/DOWN arrow keys to change the frequency in steps of 0.1MHz or press
and hold to scan for the next station.
The Soundbook will remember the last tuned frequency when it is turned off, for your convenience.
English
Troubleshooting
The Soundbook will not turn on
Ensure that the battery is charged – connect the USB cable to the back of the Soundbook and use the supplied mains adapter.
The charge indicator light will be ORANGE when the Soundbook is charging, and when fully charged will turn GREEN
I cannot hear any music
Ensure that the volume is turned up on both your source device (phone/mp3 player) and also on the Soundbook. Ensure that the
Soundbook is switched to the correct input (AU for cable connection, BLU for Bluetooth music streaming). Ensure that your source
device has the correct output selected (for Bluetooth, select the output as 'Bayan Soundbook')
I cannot pair my Bluetooth media player with the Soundbook
For secure simple pairing to function, your Bluetooth device needs to be in close proximity to the Soundbook (nominally within 50cm).
For NFC pairing to work, your source device (phone/mp3 player) needs to be turned on and the screen unlocked.
I cannot tune to any radio stations
The Soundbook uses an advanced integrated FM antenna. In certain circumstances (e.g. it is located indoors in the centre of
a building, or is placed on top of an electrically noisy component) the Soundbook may not be able to tune to a radio station.
Please try re-locating the Soundbook to another position (close to a window works well).
Specifications
Bluetooth Version: 4.0
(can pair with devices back to Bluetooth version 2.1)
Profile: A2DP, HFP
aptX
high quality audio: yes
®
Note: Apple devices up to and including the iPhone 5 do not currently support NFC.
1
NFC Secure Simple Pairing for Bluetooth: yes
Effective Range: 10m (30 feet)
Dimensions: 160mm x 88mm x 38mm
Weight: 530g
English

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis