Self-Cleaning Function - Melissa 16390054 Handbuch

Steam ironing
• Fill with water.
• Turn the thermostat dial (9) to position
•• or •••. The indicator light (8) will
come on.
• Once the indicator light goes out,
the required temperature has been
reached and you can start to steam
iron. The indicator light will go on and
off during use, which merely indicates
that it is maintaining the selected
temperature.
• Turn the steam quantity button (3) to
the required setting. Constant steam
will be emitted from the holes in the
soleplate (11) when you hold the
appliance horizontal. Place the appli-
ance on its base (7) or turn the steam
quantity button to position 0 to stop
the steam.
Steam shot
• The steam shot function for smooth-
ing out stubborn creases can only
be used when the thermostat dial is
turned to the maximum setting and
the indicator light is not on.
• Press the steam shot button (5)
to spray steam onto the garment
through the holes in the soleplate.
Wait a few seconds before the next
steam shot.
• You can also hold the appliance verti-
cal to give hanging curtains, clothing
on hangers, etc. a shot of steam.
Water spray
• Press the water spray button (4) to
spray water out of the spray nozzle
(1) on the front of the appliance.
Please note that you may have to
press the button a few times to get it
to work.
Press the button slowly or quickly, de-
pending on how you want the spray.
UK
• Do not use this function on dry
clothes. Instead, moisten the clothing
before ironing, or place a damp cloth
between the clothing and the sole-
plate.

SELF-CLEANING FUNCTION

The appliance must be cleaned at regular
intervals, depending on the hardness of
the water and how often the appliance is
used.
• Fill with water to the MAX mark.
• Turn the steam adjustment button (3)
to position 0.
• Turn the thermostat button (9) to the
highest setting (MAX).
• Plug the appliance in and allow it
to heat up until the indicator light
goes out. Remove the plug from the
socket.
• Hold the appliance horizontally over a
sink.
Turn the steam adjustment button (3) to
the highest position. Boiling water
and steam will be emitted from the
soleplate, washing out all the limes-
cale deposits. Move the appliance
back and forwards over the sink at
the same time.
• Turn the steam adjustment button to
position 0 once the water reservoir is
empty.
• Unplug the appliance and allow it to
cool before putting it away.
CLEANING
• Press the steam shot button (2) a few
times and carefully shake the appli-
ance after use to ensure there is no
more water in the appliance.
25