Whale UF2415B Installations- Und Bedienungsanleitungen

High Capacity Freshwater Kit
INSTALLATION & USER INSTRUCTIONS
Thank you for purchasing this Whale® product.
For over 60 years Whale has led the way in the design and manufacture of freshwater, bilge and waste management systems including plumbing, taps, showers and
pumps, for low voltage applications. The company and its products have built a reputation for quality, reliability and innovation backed up by excellent customer service.
For information on our full product range visit: www.whalepumps.com
CONTENTS
1. Specifi cation
2. Principles of Operation
3. To The Fitter & User
4. Application
5. Warnings
6. Parts List
7. Instructions for Installation
8. Maintenance
9. Trouble Shooting
10. Winterising
11. Service Support Details
12. EU Declaration of Conformity
13. Warranty
1. SPECIFICATION
Model
Product Codes
Accumulator Tank size
Open Flow Rate (per minute)
Voltage
Recommended Automotive Fuse Rating (per pump)
Cut Out Pressure
Cut In Pressure
Weight
Factory Pre-Charge Pressure
Inlet and Outlet Size
Materials in Contact with Liquid
Maximum Outlets
Maximum Lift
2. PRINCIPLES OF OPERATION
The Whale High Capacity Freshwater Kit is designed to provide freshwater in recreational vessels with up to 8 water outlets on board. The system consists of two
automatic pressure pumps, independently controlled by two external pressure switches. A primary pump provides smooth consistent fl ow on activation. When a higher
fl ow rate is required, the secondary pump will automatically activate to provide the additional capacity, and turn off when no longer required. The 2 litre pressurised
accumulator tank ensures a smooth transition between single and dual pump activation, and helps to prevent water hammer.
Read the following carefully before installation
WARNING: Please note that incorrect installation may invalidate warranty.
3. TO THE FITTER & USER
To the Fitter:
Check that the product is suitable for the intended application, follow these installation instructions and ensure all relevant personnel read the points listed below. Also
ensure that these operating instructions are passed on to the end user.
unauthorised modifi cation or misuse of the product.
To the User:
Read the following instructions carefully.
4. APPLICATION
This kit is designed for installation in recreational vessels, only for freshwater use, with 12 V d.c. or 24 V d.c. electrical supply only.
5. WARNINGS
• The High Capacity Freshwater Kit is designed to deliver freshwater in leisure boats and personal watercraft. Your warranty may be invalidated if the product is used
in other applications or outside the remit of the standards quoted on the packaging and product literature. If used for a diff erent application, it is the user's
responsibility to ensure the unit is suitable for the intended use and the materials are fully compatible with the liquids to be used.
• With all applications, it is important that a system of safe working practice is applied to installation, use and maintenance. Ensure the electric supply is turned off and
water system is drained before installation.
FIGURES
Fig. 1A
Fig. 1B
Fig. 2
Fig. 3
Fig. 4
Fig. 5A
Fig. 5B
Fig. 5C
Fig. 6
Fig. 7
High Capacity Freshwater Kit
UF2415B UF2425B
2 Ltrs (0.53 US Gals)
24 Ltrs (6.3 US Gals)
12 V d.c. 24 V d.c.
10A 5A
Pump 1: 3.0 bar (45 psi); Pump 2: 2.0 bar (30 psi)
Pump 1: 2.0 bar (30 psi); Pump 2: 1.4 bar (20 psi)
8.7 kg (19 lbs)
2.2 bar (32 psi)
¾" barb (19mm)
Glass Filled Polypropylene, Santoprene®, Nitrile®, Butyl, Stainless Steel, Brass
up to 6
The manufacturer cannot be held responsible for claims arising from incorrect installation,
1
UF2415B / UF2425B / UF3615B / UF3625B
Product Components View 1
Product Components View 2
Typical Installation in Marine System
Overall Dimensions
Securing Kit
Inlet Attachment
Outlet Attachment
Attaching Freshwater System Plumbing
Wiring Diagram
Valve Location For Annual Check
UF3615B UF3625B
32 Ltrs (8.4 US Gals)
12 V d.c. 24 V d.c.
12A
9.8 kg (22 lbs)
up to 8
3 m (10 ft)
EN
8A