General; Application; General Warnings - CLIMAVENETA a-CHD U-2T 606 Bedienungsanleitung

APPLICATION

CAREFULLY READ THIS MANUAL BEFORE INSTALLING
THE APPLIANCE
The Cassette fan coil are designed for use in commercial
and private environments with false ceilings. The Cassette
fan-coil units are exclusively built for air heating, filtering,
cooling and dehumidification. They are not suitable for any
other purpose.
The Cassette fan-coil unit may not be used:
• for outdoor air treatment
• for installation in moist rooms
• for installation in explosive atmospheres
• for installation in corrosive atmospheres
Make sure that the environment where the appliance is
installed does not contain substances that cause the cor-
rosion of the aluminium fins.

GENERAL WARNINGS

The appliances must be installed by a qualified company
in accordance with the laws and regulations in force in
the country of installation. Upon completion of work this
company should issue the owner the declaration of con-
formity of installation with current regulations and stan-
dards and with the instructions given in this booklet.
These appliances have been designed for cooling or
heating environments and should only be used for this
purpose in compatibility with their performance charac-
teristics. Under no circumstances can the Company be
held liable under contract or in tort for damage caused to
property or injury to persons or animals due to incorrect
installation, regulation and maintenance or to improper
use.
Avoid the room being closed for a long time. Periodically
open the windows to ensure a correct change of air.
Too low a temperature is harmful to health as well as
being a useless waste of energy. Avoid direct contact
with the flow of air.
During storms put the installation on/off switch to "off".
This instruction booklet is an integral part of the appli-
ance and should therefore be carefully preserved and
ALWAYS accompany the appliance, also in the event of
transfer to another owner or user or into another installa-
tion. Should the booklet be damaged or lost, request a
copy from the Area Service Centre.
Repair or maintenance work must be carried out by the
After-Sales Service Centre or by qualified personnel in
accordance with instructions given in this booklet. Do not
alter or tamper with the appliance, since hazardous situ-
ations could be created and the manufacturer of the
appliance will not be liable for any damage or injury
caused.
In the case of Heating installations, the temperature of
the water circulating in the fan coil must not exceed 80
°C.
The appliances are supplied with hot/cold water depending
on whether the environment is being heated/cooled.
The manufacturer/seller cannot be held liable for any loss or
damage caused as a result of incorrect
installation, operation or maintenance of the cassette fan
coil units or due to any non-compliance with this
User Information Manual or any inspection, repair and main-
tenance requirement.
Appliance must to be installed at minimum 2,5 meter
above the ground.
All personnel must have been trained or given appropri-
ate instructions. Personnel responsibilities must be
defined clearly. All electrical work must be carried out by
or under the supervision of qualified electrical installers.
all waterwork must be carried out by qualified installers
or by personnel who have been given appropriate
instructions.
Assembly, disassembly, installation, electrical work, com-
missioning, repair and maintenance of the Cassette cof-
fered-ceiling fan-coil unit must be in accordance with all
applicable health and safety laws, rules and regulations,
relevant codes and standards and the latest technology.
They may include rules, regulations, codes and stan-
dards applicable to refrigeration systems, pressure ves-
sels, electrical installations and lifting tackle.
Wiring diagrams in this User Information Manual do not
address protective grounding or other electrical protec-
tion which will be required under local rules, regulations,
codes or standards or by the local electricity supplier.
All repairs or maintenance must be performed by quali-
fied specialists.
The manufacturer declines all responsibility for damage
caused by modifications or tampering with the unit.
Any modification of or addition to the fan-coil unit which
may affect safety including the incorporation and setting
of safety devices and valves requires approval by the
manufacturer.

General

General
3
EN