Jabra PRO 920 Einrichtung Seite 7

STEP 6: CONFIGURE THE SOUND
1 Put on the headset, or tap the headset
multi-function button if the headset is
currently undocked.
2 Get a dial tone by either pressing the
headset button on the desk phone, or by
lifting the desk phone handset. If there
is no dial tone, check that all cables are
connected correctly.
3 Dial a friend or colleagues phone number
using the desk phone. If you cannot
hear anything refer to 'Having sound
problems?' below.
4 Check your speaking volume. If the
listener says your speaking volume is too
quiet or too loud, adjust the microphone
volume using the microphone + / -
volume buttons on the back of the base.
Ensure the listener does not adjust their
own volume.
5 When finished, end the call.
IMPORTANT
Having sound problems?
If you cannot hear anything during the
test call, or the sound is distorted, try
rotating the clear dial tone switch on the
back of the base from A-G until the sound
is optimal. For further details refer to
section 4.1 in the user manual on the CD.
YOU HAVE NOW SUCCESSFULLY CONNECTED YOUR JABRA PRO 920
CLICK
8
HOW TO MAKE A CALL
OPTION A
Desk phone with
headset port
OPTION B
Desk phone with-
out headset port
OPTION C
Desk phone with
GN1000 or
electronic
hoockswitch
9