Ce Declaration; Safety Requirement - TTI TCB-660 Gebrauchsanweisung

11. CE Declaration

CE versions of the TCB-660 which display the
CE symbol on the product label, comply with the
essential requirements of the European Radio
and
1999/5/CE.
This warning symbol indicates that this equipment
operates in non-harmonised frequency bands and/or may
be subject to licensing conditions in the country of use.
Be sure to check that you have the correct version of this
radio or the correct programming of this radio, to comply
with your national licensing requirements.
This unit can be used without license and charges in; Austria,
Belgium, Denmark, Finland, France, Germany, Great Britain,
Greece, Italy, Luxemburg, Netherlands, Portugal, Spain,
Sweden, Switzerland

12. Safety Requirement

The power cable is for 13.2V DC only. Be sure the transceiver
is off before connecting the leads of the power cable to the
power supply. It is important to observe the polarity even if the
unit is protected against the accidental inversion :
* Red : Positive pole (+)
* Black : Negative pole (-)
The same colors are present on the battery and in the fuse box
of the car.
The unit must be wired for the negative ground only.
To avoid damage, do not operate your CB radio without
connecting a proper antenna.
TCB-660
Telecommunication Terminal Directive
13