HQ Power VDPLP64B4RGB Bedienungsanleitung Seite 5

o Custom Colour Mixing Mode
The VDPLP64B4RGB allows you to create your own colour shade. Select them as follows:
1. Press MENU until
2. Confirm your selection with ENTER.
3. Set the desired colour value (
4. Confirm your selection with ENTER. Set the desired colour value for the remaining colours.
5. Confirm your selection with ENTER.
Setting the pre-programmed effects:
Setting the static colours:
• Master/Slave Mode
The master/slave mode enables you to synchronize several PAR64s controlled by the master PAR64.
Interconnect all your PAR64s (XLR output of the previous PAR64 connected to the XLR input of the next
PAR64).
Next, select your master PAR64, usually the first in the series. Enable the master function as follows:
1. Select any of the stand-alone functions as described above (
button.
2. Confirm your selection with ENTER.
Finally, set the slave PAR64s as follows:
1. Press MENU until
2. Confirm your selection with ENTER.
3. Set the DMX address to
All connected PAR64s will react according to the master PAR64.
6. DMX512 Mode
Press MENU until
Set the DMX address (
• Detailed DMX Values per Channel
o 3-Channel Mode
Channel Function
1
2 Green
3
29.03.2011
appears on the LCD control panel.
Mode Value
P1
P2
P3
P
P4
P5
P6
Mode Value
C
or appears on the LCD control panel.
with the UP or DOWN button.
or appears on the LCD control panel. Confirm your selection with ENTER.
) with the UP or DOWN button.
From
Red 000
000
Blue 000
VDPLP64B4RGB
) with the UP or DOWN button.
Function
endless loop 7 colours,
change every 3 seconds
endless loop 7 colours,
fade every 3 seconds
endless loop 3 colours,
change every 3 seconds
endless loop 3 colours,
fade every 3 seconds
endless loop 7 colours,
sound control
endless loop 3 colours,
sound control
C1
C2
C3
C4
C5
C6
C7
To Description
255 0 ~ 100%
255 0 ~ 100%
255 0 ~ 100%
5
Function
red
green
blue
cyan
magenta
yellow
white
, or ) with the MENU
Rev. 02
©Velleman nv