Technical Features - SCOPREGA BRAVO 800 6130096 Bedienungsanleitung

• Retain this manual for future reference.
• Always take care when using the appliance. This appliance is not intended for use by young
or infirm persons without supervision. The appliance is not to be used as a toy. Do not allow
children or animals to come near the work area or touch the appliance or power supply cord.
• Close supervision is necessary when the appliance is used near children.
• Use in a dry location only. Do not allow the appliance to become wet.
• Do not immerse the appliance in water.
• Do not open body casing. There are no user serviceable parts inside.
• Do not operate the appliance in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
• To reduce the risk of damage to plugs and cords never pull the cable to remove the plug from
a socket.
• Safety of others
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance by a person responsible for their safety. Children
should be supervised to ensure that they do not play with the appliance.
• After use
When not in use, the appliance should be stored in a dry, well ventilated place out of the reach of
children. Children should not have access to stored appliances. When the appliance is stored or
transported in a vehicle it should be placed in the boot or restrained to prevent movement following
sudden changes in speed or direction.
• Inspection and repairs
Before use, check the appliance for damaged or defective parts. Check for breakage of parts, dama-
ge to switches and any other conditions that may affect its operation. Do not use the appliance if
any part is damaged or defective. Have any damaged or defective parts repaired or replaced by an
authorised repair agent. Never attempt to remove or replace any parts other than
those specified in this manual.
• Additional safety instructions for inflators
For home use only. Inflate balls, swimming pool floats and more in and around the home.
The compressed air from your inflator is not safe for breathing. Never inhale air from your inflator or
from a breathing device connected to the inflator. Inflate items only to their manufacturer'srecom-
mendations. Exceeding the pressure rating could cause them to explode resulting in personal injury.
- Do not modify or attempt to repair. Never drill into, weld, or make any modifications
to the inflator or its attachments.
- Do not play with the tool. Do not direct air-flow at yourself or others.
- The inflator can become hot during use. Allow the inflator to cool for 30 minutes before
storing away.
- Never carry the inflator by the hose.
- Do not direct the nozzle or hose at animals or bystanders.
- Store the inflator out of reach of small children.
- Before use, check the power supply cord for signs of damage, ageing and wear.
- Do not use the appliance if the power supply cord or mains plug is damaged or defective
(where applicable).
1. Follow all instructions.
2. Do not block any ventilation openings.
3. Protect the cord from being walked on or damaged.
4. Do not open the inflator. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way.
5. Do not disassemble product. Incorrect reassembly may result in a risk of Short Circuit.
6. Provide adequate ventilation and refrain from placing items on or around the product during
operation.
7. Keep this product out of the reach of children
• DO NOT SUPPLY THE INFLATOR AT HIGHER VOLTAGE THAN NORMAL
USE OF THE BRAVO 800
BRAVO 800 has been designed to inflate both small objects and small boats and pools. Orienting the
handle is possible to use part of the sucked air to cool the motor, reducing the output air flow.
• Use the handle in vertical position to inflate small objects and in horizontal position for large items.

TECHNICAL FEATURES:

• Voltage 230V – 50 Hz
• Power 750 W
• Maximum pressure 190 bar (2,8 psi)
• Maximum flow 800 l/min
TO INFLATE:
1. Before inserting the plug in the socket, verify that main voltage corresponds to the
one indicate in this manual.
2. Connect the hose to the port situated on the switch side of inflator.
3. Put the handle in vertical position to obtain the maximum flow rate or horizontally to cool
the engine.
4. Turn ON the switch.
• CAUTION! WHEN THE HANDLE IS IN THE VERTICAL POSITION DO NOT RUN THE INFLATOR
MORE THAN 20 MINUTES. COOL DOWN THE UNIT FOR 15 MINUTES AFTER. THE INFLATOR
CON BE STOPPED BY PRESSING "OFF".
5. Switch off the when the inflatable has reached the desired pressure
• CAUTION! THE INFLATOR DOESN'T STOP AUTOMATICALLY! IT'S NECESSARY TO CONTROL
THE DEVICE OPERATIONS IN ORDER TO AVOID THE DANGER OF OVERINFLATION.