photo 3
BLENDER OPERATION
- before connecting the blender (8) make sure the appliance is unplugged and the switch (2)
is set in the position "0"
- remove the housing (12) in the back part of the body of the mixer (4)
- insert the blender (8) on that position and turn it clockwise, photo 3
- plug in the appliance
- the mixer starts its operation after a proper speed is selected with the switch (2).
After pressing the "TURBO" button (3) we obtain the maximum speed.
When the appliance is no longer used, set the switch (2) in the position "0" and unplug the
appliance.
Disassemble the blender (8) by turning it counter clockwise.
NOTE
Observe the maximum time of continuous operation:
Exceeding the operation time and lack of sufficient intervals in the operation of the appliance
may result in the irreversible motor damage which is not covered by the manufacturer's
warranty.
To avoid splashing, adjust the rotation of the mixer to the consistency of the processed
products.
When the appliance becomes blocked, unplug it before cleaning.
Accessories and containers are not adapted for the preparation of hot meals.
If the appliance slows down while mixing or beating, interrupt the operation and rarefy the
mixed or beaten product, if possible.
To prevent the overflow of products from the bowl while mixing, do not fill it above 2/3 of its
capacity.
CLEANING AND MAINTENANCE
Before cleaning, unplug the appliance.
Do not wash the appliance in a dish-washer machine.
Do not immerse the body (4), the arm (5) and the stand (9) in water.
Clean these components with a damp cloth or towel.
Do not immerse completely the blender (8) in water.
Only the ending with the knife can be immersed.
Complete immersion of the blender (8) may result in the knife seizure and the warranty loss.
Do not clean the knife with bare hands. Use a brush for cleaning.
Other components of the appliance can be washed in warm water with a dishwashing
liquid.
Do not clean the appliance with sharp, abrasive cloths or sponges as it may destroy the
appliance.
Blender knife is an operating component and is
not covered by the warranty.
6