Perry Electric Easy Program Installations-, Programmierungs- Und Bedienungsanleitung Seite 40

6.4 - HOLIDAY Program - P 06
If you will be away from home for a few days select
!
Press PROG repeatedly until
(fig. 37).
!
The following will appear on the display: the day of the week, the symbol , the word
HOLIDAY (fixed) and the digits
!
Set the number of hours you will be away for (example:
G
mum number of hours you can enter in Holiday mode is
!
B Set the duration of your absence by pressing
decrease by one hour or keep either key pressed to activate the rapid scroll.
!
Press OK to confirm (fig. 38).
From this moment onwards, the chronothermostat will begin a countdown and the
Holiday program will maintain the set anti-freeze temperature (5 °C) until the countdown
reaches zero (fig. 39).
Once the countdown ends, the Holiday program will activate your usual program (P01,
P02, P03, P04, P05), in order for you to find your home at the desired temperature when
you return.
Note : you can exit the HOLIDAY program earlier anyway by pressing
to reset the hours left for your return to
your usual program.
Attention: if the anti-freeze temperature is deselected permanently
"Summer" mode , the Holiday program will keep the controlled load disabled for the set duration.
40
P 06 Holiday
P 06 , appears on the display, then press
000 (blinking).
168 hours = 7 days). The maxi-
999 .
, repeatedly to increase or
c000 then press OK to confirm and return to
(see paragraph 7.3)
OK to confirm
c
Fig. 37
Fig. 38
PROG then OK ; Use
or in
Fig. 39
PROG DAY
R
Blinking
PROG DAY
R
PROG DAY
R