Learning - Beeper Lite Einrichtungs- & Benutzungshandbuch

LEARNING

1. Order presentation
Battery level
DIS
Speed engaged
2. Detail of the functions
Long press the ON / OFF button to turn on or off the LCD display.
To change the function, press a short press on the ON / OFF button of the LCD display
VOL: Battery charge level
ODO: Total Mileage (long press to reset)
RPM: Number of revolutions per minute
Time: Overall Time Elapsed
Speed selection for scooters
Speed 1: A pressure
Speed 2: New pressure from speed 1
Cruise control : keep the throttle trigger activated at the same speed for 3 seconds, a light will come on to
indicate that the controller is engaged. To disable it, simply slow down or accelerate.
3. Using scooter
1.
Press the ON / OFF button for 2 seconds.
2.
Place one foot on the platform, then push the floor with the other foot.
3.
Put the second foot on the platform when you have enough momentum.
4.
Select your speed and lightly press the accelerator to start.
5.
Press the accelerator to advance.
6. Press the brakes to slow down.
7.
When the scooter is stopped, you can go down.
3. Using keys of contacts (only model
Unlocking
Locking
Alarm
Speed
Speed selection
higher
km/h
ON / OFF Button
Speed selection
lower
Mileage
&
Remote start
km/h
km
Battery level
)
Press to lock the scooter (an alarm will sound and the
wheel lock will activate if you try to roll it.
Press to unlock the scooter.
Press to turn on the alarm.
Press twice for remote start. Press once to
the scooter.
25
&
Speed engaged
Speed
Mileage
ON / OFF Button
M
Speed selection
for turn off