Open-Window Detection - Klarstein Bornholm Smart Bedienungsanleitung

Display buttons activation
Display buttons are off when unit is working, touch the panel below display, they are on.
ECO function(night mode)
In heating mode, press 1 & 3 for 3s(press ECO on RC), ECO function runs. In this mode, display shows only some
indicator(5 or 6 or 7 or 8, depending on which setting has been done before ECO runs).
Switching The Display Between Degrees Fahrenheit And Celsius
Press the keys 1 & 2 (the two keys on the left) simultaneously for about 10 seconds.
Switching the display between degrees Fahrenheit and Celsius
Press the keys SET and UP (the two keys on the left) simultaneously for about 10 seconds.

Open-window Detection

If temperature decreases 3°C or more in 2mins, open-window detection acts and, unit stops heating, indicator 9
flashes. Press button 4, turn off heater then turn on again,.open-window detection is closed.
WIFI Reset
In heating mode, press button 1 for 3s, WIFI setting is reset with its indicatior blinking rapidly (twice per second).
Turn off
Press button 4, turn off the heater.
23