Functional Features / Technical Data - Gewiss GW 10 862 Anwenderhandbuch

FUNCTIONAL FEATURES / TECHNICAL DATA

Model:
Protection rating:
Power:
Running Voltage:
Low battery Voltage
Absorption:
Connections to the terminal board: None
Wireless section:
Operating Capacity:
Autonomy:
Running temperature:
Tamper:
Installation:
Plate dimensions ONE:
Plate dimensions LUX:
Standard Fittings:
The GW 20 470 and GW 20 481 control units, the GW 10/12/14 862 – GW 10/12/14 867
push-button panel, the compatible sensor group and sirens are all manufactured in
compliance to the following Standards: EN 50131-1, EN 50131-5-3, CEI 79-16, CEI 79-2,
ETSI 300-200.
GW 10/12/14 862 - GW 10/12/14 867
IP3X, to be installed inside the zones to be protected
n° 3 AAA series connected alkaline batteries
4.5V
3.6V with control during each transmission
22 mA when the push-button panel is enabled, 37mA
when transmitting.
Digital transmission on frequencies for
Low Power Devices (LPD).
100 metres in open field.
It is recommended to replace the battery every 2 years.
+5 / +40 °C,93% Ur
Protection to prevent the removal of the detector from
the wall, and the removal of the plate
Wall-mounted, with distanced screws to fix onto
a 3-position case.
L118 x H90 x D40 mm
L123 x H90 x D40 mm
Screws, dowel, double-face adhesive, technical
manual and kit tamper-proof magnet.
44