Connections And Selections - Gewiss GW 10 862 Anwenderhandbuch

To guarantee good system protection, the product generates a tamper-proof signal if the
front plate is removed.
The presence of the plate is checked by means of a tamper-proof magnet.
To make it function, you must assemble the magnet on the plate using the kit supplied
with the product. The kit contains:
•1 magnet;
•1 double-sided adhesive to fix the magnet to the plate;
•1 fixing template;
Steps
1.Fix the template to the back of the plate, ensuring the insertion position is correct (for
the LUX plate, you must also check it is correctly orientated in relation to the GEWISS
mark on the front frame);
2.Insert and fix the double-sided adhesive to the plate, using the template cut-out as a
reference;
3.Fix the magnet to the double-sided adhesive (be sure to centre it in relation to the
arrows next to the cut-out)
4.Remove the fixing template;
5.Assemble the plate on the product, respecting the correct position;
Second shaped hole, only on LUX plaques
USER INSTRUCTIONS

Connections and selections

2.
1.
3.
Magnet
Double-sided adhesive
Fixing template
(shaped hole to identify
the correct position)
32