Notes; Replacing The Battery - Gewiss GW 10 862 Anwenderhandbuch

USER INSTRUCTIONS

Notes

REPLACING THE BATTERY

The push-button panel uses AAA alkaline batteries, and they must only be replaced by the
same type making sure the poles are in the right direction.
Remove the discharged batteries, and press and release any push-button before inserting
the new ones.
DISPOSAL
The old batteries must be disposed of according to the laws in force using the specific
collection bins. The disposal of the push-button panel must be implemented in compliance
with the laws in force in the country where the system is installed.
CLEANING
Clean the push-button panel using a damp cloth and non-corrosive detergents for plastic
surfaces; do not spray the detergent directly onto the case.
42