Specifications - Vitek VT-3595 BK Betriebsanweisung

English
using alarm on function).
4. If you want to turn off the radio
ahead of time, it will not turn off
even with the Power off button
pressed. Press the Alarm ON/OFF
button (2) to turn off the radio.
Attention: The alarm on function can
be used as sleep function to avoid
power wasting.
1. In the working state, press
the alarm ON/OFF button (2),
the alarm symbol " " will be
displayed on the LCD.
2. Set the alarm on time as clock
time, the radio will automatically
turn on and turn off within 1 hour
of working.
. Press the alarm ON/OFF (2)
button if you want to turn off the
radio ahead of time.

Specifications

1. Frequency Range
FM 87-108 MHz
MW 526.5-1606.5 KHz
SW1 5.95-6.20 MHz
SW2 7.10-7.0 MHz
SW 9.50-9.90 MHz
SW4 11.65-12.05 MHz
SW5 1.60-1.80 MHz
SW6 15.10-15.60 MHz
SW7 17.50-17.90 MHz
SW8 21.45-21.85 MHz
2. Sensitivity
FM: 22dBµ
MW: 70dBµ
SW: 8dBµ
Single-signal Selectivity: ≥ 10dB
.
4. Power:
595IM.indd 6
AC 220V 50Hz
DC 4.5V three UM1 batteries
Maximum current: ≤ 50mA
5.
Speaker: Ø 92 mm/8 Ohm/1 W
6.
7. Earphone: Ø .5 mm/ 2 Ohm.
8. Unit Size: 220 х 11 х 60 mm.
9. Weight: 655g (without battery)
The manufacturer reserves the right
to make changes to the characteris-
tics of the device without prior notice.
The service life of the device is no
less than five years.
Guarantee
Details regarding guarantee con-
ditions can be obtained from the
dealer from whom the appliance was
purchased. The bill of sale or receipt
must be produced when making any
claim under the terms of this guar-
antee.
This product conforms to
the EMC-Requirements as
laid down by the Council
Directive 89/6/EEC and
to the Low Voltage
Regulation (2/7 EEC)
6
09.03.2007 17:20:08