Installing Batteries - Vitek VT-3595 BK Betriebsanweisung

FM/MW/SW1-8 10 BAND DIGITAL
RECEIVER WITH ALARM
CLOCK
PRECAUTIONS
1. Avoid fierce lash, falling on the
ground.
2. Do not put the radio in the places
where it is under sunshine, heat
or humidity.
. Keep magnetic tape, magnetic
card and other magnetic record
software away from the speaker,
in order to avoid that the record
is erased or there is noise in the
magnetic tape.
4. If something falls in the radio,
please apply to a maintenance
man.
5. When it is thundering and
lightning, please do not use the
radio.
6. Each index of the radio is
adjusted well, so please do not
adjust the components in the
radio.
7. Use a soft cloth with detergent to
clean the cabinet. Please do not
use alcohol, thinner and other
strong detergent to clean it.
POWER

Installing batteries

1. The radio uses three UM1
batteries, please put the new
batteries in the battery slot
according to the polarity.
2. If the sound is distorted or the
volume is faint, please change
the batteries in time.
3595IM.indd 3
Hint: please use high quality alkaline
batteries.
Attention:
1. Do not use new and old or
batteries of different types
together.
2. In order to prevent the leakage of
the electrolysis liquid or danger of
explosion, do not charge, heat or
resolve the batteries.
. If you do not use the radio for a
long time, please take out the
batteries, lest the leakage of the
battery corrodes the parts in the
radio.
4. When the electrolysis liquid
leaked, please clear it away, and
then install new batteries.
220V External Power
When using external power, connect-
ing the radio with the 220V outlet by a
220V external power line, the battery
supply inside the radio is cut auto-
matically.
Attention: The mains voltage for the
radio is 180V-240V, if the voltage ex-
ceeds the range, the radio will work
abnormally.

English
09.03.2007 17:20:06